Latest activity
-
Kit352 replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.I'm gonna have to wait for another YouTuber to review this. Rich was my neighbor and is a nightmare of a person. I just can't give him...
-
Kid_Yota replied to the thread What is "Quality Hold" Status.Wow. That’s how the timeline should work.
-
AtomicSushi replied to the thread Premium fuel 91 octane gains 20 hp / 14 lb-ft torque (vs. 87 octane) on gas engine 2.4L i-Force -- dyno test.Have you ever seen an engine tear down at a shop? Crappy gas leaves deposits, especially in DI turbo charged motors. I'm neither a...
-
SC4Runner replied to the thread Poll - Who thinks the air dam is hideous?.It’s not just the 4Runner, there’s other vehicles out there that look hideous with them too! I had the dealership remove it before I...
-
cookiemonster131 replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.Yea love the shared parts. I was also amused in the fact a 4wd 2 door 95+ blazer is in the warehouse half covered up. If you also look...
-
Quasim0d0 replied to the thread What is "Quality Hold" Status.Here's how mine went down. Put a deposit on 05.25.2025 Got notified vehicle was at the processing center on 06.19.2025 Got notified it...
-
5ohbrad replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.Did anyone else catch the part about the same part being used for both door armrests as well as the console armrest? The simplicity in...
-
EV-LOVER replied to the thread Received my gift in mail from Slate Auto - concept sketch.Maybe tomorrow
-
AdamDeveaney posted the thread 285/75R18s on stock TRD Pro - Zero Trimming, but you have to remove front flaps and crash plates (Photos included) in 4Runner Topics -- via 4Runner6G.285/75R18s (34.8” x 11.2”) fit on a stock TRD Pro (or Trailhunter) with the mud flaps and crash plates removed. So I have a stock TRD...
-
cadblu replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.The best video I’ve seen so far. A candid insider’s view of what to expect. As I see it, the key takeaway is why haven’t other, more...
-
Tallgeese00MS replied to the thread What is "Quality Hold" Status.Haha I’m tempted as well
-
RetroVertigo replied to the thread What is "Quality Hold" Status.It’s the same with mine … no dates at all. Just Factory to port and Dealer Hold. I’m ready to drive to Long Beach.
-
metroshot replied to the thread Received my gift in mail from Slate Auto - concept sketch.Gee I never got anything...
-
Tallgeese00MS replied to the thread What is "Quality Hold" Status.It’s ok, I don’t think Toyota does either lol
-
spwaca replied to the thread Rear seat belt indicator light on startup.Mine does the same thing. I thought there might be an issue with my rear seat sensor, but the warning light disappears after 15 sec or...
-
EL616 posted the thread Android Auto audio skips and disconnects -- FIX in 4Runner Topics -- via 4Runner6G.Picked up my ORP on Friday and put several hundred miles on it over the weekend. Unfortunately I was having some issues with Android...
-
cookiemonster131 replied to the thread Received my gift in mail from Slate Auto - concept sketch.Mine too
-
Kid_Yota replied to the thread What is "Quality Hold" Status.I can’t figure out a rhyme or reason to which vehicles get through the QC Hold quickly and which have substantial hangups.
-
skidoofast replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.WOW, he did a fantastic job with this video, I loved looking in the background shots, seeing the cutaways, seeing the slate in the...
-
AKrietzer replied to the thread Received my gift in mail from Slate Auto - concept sketch.Yippee, mine arrived!
-
EL616 posted the thread Rear seat belt indicator light on startup in 4Runner Topics -- via 4Runner6G.I get this indicator light and several chimes every time I start my ORP. There is nothing in the backseat and it happens whether or not...
-
6GRunner replied to the thread My Underground Off-Road Premium Hybrid 4Runner Build.I bought it from Amazon based on another forum member’s recent post. TACOBRO is the manufacturer. I previously bought another brand but...
-
YanMik replied to the thread My Underground Off-Road Premium Hybrid 4Runner Build.Getting the same color, except mine is underground TRD offroad NON-Premium. I will be installing wolfbox with front bumper camera.
-
outdoorCO replied to the thread My Underground Off-Road Premium Hybrid 4Runner Build.Where’s the tray from in center console?
-
6GRunner replied to the thread Quick reference placard for 12.3" MID settings.Thank you for assembling this as it helps to organize my thought process a bit. I’m generally happy with my #1 screen settings but would...
-
bpurkapi replied to the thread Poll - Who thinks the air dam is hideous?.I had the 2018 TRD sport Tacoma prior to the 4Runner - hated the air dam the entire time I had the vehicle. Made sure to never have that...
-
DocASim replied to the thread Roof rack that works with moonroof?.I installed the Westcott low profile full rack and just left out the first cross bar. Moonroof works fine. Minimal wind noise
-
Hi everyone, just picked up a TRD Premium and want a winch for recovery when things go wrong on the trail. Would a hitch winch work as...
-
Paul Rodgers replied to the thread Would you buy a used Slate truck?.Price! If it's inexpensive, still has ok range, and is not polluted with a million meaningless options? Then yes. By that time we will...
-
Dphotos replied to the thread Toyota OEM Dash Cam - placement correct?.You need to sit down with The dealers general manager and tell him or her you are not happy about being sold an older model dash cam for...
-
LARIN replied to the thread Got Katskinz installed last week 6th Gen 4Runner sr5 4x4 3 row.Did they add more padding to make them more comfortable?
-
Jakethewhippet1 replied to the thread Poll - Who thinks the air dam is hideous?.I love it, I'm tall and can not see it.
-
LARIN replied to the thread Poll - Who thinks the air dam is hideous?.I wonder what the Tacoma people think, they have them on the new and old versions
-
slateya replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.Releasing CAD and available load data for access points. This will be revolutionary for accessories.
-
mr.Fister posted the thread Got Katskinz installed last week 6th Gen 4Runner sr5 4x4 3 row in 4Runner Topics -- via 4Runner6G.I contacted katskinz cause I’ve heard good things and they are as close to oem you will be able to get on the market period. There are...
-
Is anyone running a tire carrier on the 6GR? Wanted to add a rear tire carrier as my spare doesn't fit anymore but was concerned about...
-
Dphotos replied to the thread Poll - Who thinks the air dam is hideous?.I feel it is not appropriate for a Toyota 4Runner. A front spoiler would look better on a sports car. Even if a 4Runner is used to go...
-
Benjamin Nead replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.OK, Rich Benoit (aka: Rich Rebuilds) is on the job! For those who don't know, Rich is the guy who took Tesla to task for insisting...
-
Dphotos replied to the thread Aftermarket dash cam (front and rear) recommendations?.I ordered a 2025 Limited which I am suppose to pick up after the 7/4 holiday. It was released from the QC at the Long Beach port after a...
-
AtomicSushi replied to the thread First Oil Change on 2025 Trailhunter (i-Force Max) at 1,010 Miles.@Drewbice That is entirely up to you. I brought my own oil and filter to a 10 minute place up the road rather than drive 30 mins to the...
-
Archer replied to the thread The Rear Spoiler feels loose, or is it just cheap?.Mine feels the same, I think most do, I'm hoping there's a reason and it's not gonna end up like the front air dams. .
-
Tallgeese00MS replied to the thread What is "Quality Hold" Status.Yeah, I really don’t have a rushed need to get it right away but boy is it frustrating seeing/hearing everyone else get theirs while...
-
cookiemonster131 replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.Yep agreed i like uncle rich and been waiting for his response. Well done video
-
megs replied to the thread What is "Quality Hold" Status.Same with mine. Mine is coming from Long Beach too w/ original pick up dates for 5/21-5/29 and no updates this entire time. Deposits...
-
SLATEchad replied to the thread Rich Rebuilds video review from Slate Truck design, engineering, production labs!.Nice! This is the kind of video I've been checking youtube for daily! Glad to see the tire mount can be accessorized with the standard...
-
Tallgeese00MS replied to the thread What is "Quality Hold" Status.salesman said there is no current update on the status tracker page he has access to. Mine was supposed to be delivered 05/21…placed on...
-
828findadventure posted the thread The Rear Spoiler feels loose, or is it just cheap? in 4Runner Topics -- via 4Runner6G.Does everyone's rear spoiler feel like its loose? Mine is not ridged and has lots of flex.
-
jiggie replied to the thread What is "Quality Hold" Status.What has the dealer said, if anything? I know ours was originally supposed to be available around 07/30, but that date kept getting...
-
kayleighk116 replied to the thread What is "Quality Hold" Status.Mine did as well! In "processing" and was given a window today of 7/3 to 7/14.🤞🤞🤞
-
Tallgeese00MS replied to the thread What is "Quality Hold" Status.Just checked the spreadsheet since everybody else is seemingly getting theirs released form the damned qc hold and alas mine is still...